6 Press the STOP/CLEAR pad.
5 Press the SET MEMORY pad.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-program.
See Maximum Cooking Time on page 21.
3. Refer to NOTES for Advice for Defrosting on page 27.
4 Enter cooking time.
DEF.
2 Enter memory number.
NO.
3 Press the EXPRESS DEFROST pad.
DEF.
Procedure Display
Setting Total Cooking Time of Express
Defrost
* Suppose you want to set the total cooking time of Express
Defrost to 30 minutes with memory 2 using Dual Digit
Input.
* Suppose you want to set the Total Cooking Time of Express
Defrost to 30 minutes with memory 2 using Single Digit
Input.
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter memory number.
NO.
NO.
NOTES:
1. Follow steps 3-6 on the left side of page 20 to complete.
2. Press the SET MEMORY pad twice within 2 seconds.
3. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-program.
See Maximum Cooking Time on page 21.
4. Refer to Defrosting 2 and 3 on page xx.
* Suppose you want to set the Total Cooking Time of Express
Defrost to 30 minutes with memory 12 using Repeat Digit
Input.
Procedure Display
NO.
NO.
Procedure Display
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter memory number.
NOTES:
1. Follow steps 3-6 on the left side of page 20 to complete.
2. Press the SET MEMORY pad twice within 2 seconds.
3. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-program.
See Maximum Cooking Time on page 21.
4. Refer to NOTES for Advice for Defrosting on page 27.
X 2
X 2
3 0 0 0
02
2
22
R-1900M [EN].indd Sec1:20R-1900M [EN].indd Sec1:20 9/29/08 1:36:36 PM9/29/08 1:36:36 PM
To Next Page
Loading...
