Sharp Roku TV LC-32LB601C - Coaxial (Good)

19
LC-32LB601U/LC-32LB601C/LC-40LB601U
32" HD LED 720p/40" Full HD LED 1080p Sharp Roku TV
Coaxial (good)
1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE jack on your TV and to the coaxial out jack on the cable or
satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press or to highlight the Antenna TV tile, then press OK. If you have not set up the TV
tuner, follow the on-screeen instructions.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Cable or
satellite box
Coaxial
cable
Side of TV
Coaxial cable
connector
ANT/CABLE jack
On your TV
Cable
wall jack
40" TV shown