5
5.Reversing the door
This refrigerator has the capability of either opening the door from the left or
right side. This
unit is delivered to you with the door opening from the left side.
Should you desire to reverse the opening direction, please follow these
instructions.
All parts removed must be saved to do the reinstallation of the door.
NOTE:
Reversal Refrigerator Door
1.Remove
the upper hinge cap (7).
2.Remove the two screws blot (6) that connect the upper hinge (5) on the right
side of the cabinet top.
3.Carefully lift the door and place it on a padded surface to prevent scratching.
4.Remove the plug (9) and transfer it to the uncovered hole on the right side of
the unit. Be sure to press the button firmly into the hole.
5.Remove the two screws(1) that hold the lower hinge (2) on the right side of
the unit.
6.Remove the screw-type leveling front leg (4) and transfer it to the right side as
shown in the adjacent figure.
7.Set the door into it's new place making sure the pin enters the bushing at the
lower frame section (hole).
8.Secure the upper hinge (5) previously removed in step 3 on the left side of the
unit. Make sure the pin enters the bushing on the upper frame section (hole).
9.Loosely secure the lower left hinge (2) and do not tighten the bolts until the
door is in the closed position and leveled.
10.Insert the plug (9) on the uncovered holes (right side).
11.Replace the upper hinge cap (7).
Adjustable High Foot
Screw
Upper Hinge Cap
Adjustable Low Foot
Low Hinge
Upper
Hinge
Screw
Bolt
Shaft Sleeve
plug
8
9
7
8
9
7
6
5
4
3
2
1