12
PRECISION MACHINE TOOLS Ver 2 Maintenance Manual
Cautions Prevention
Guide way check
Constantly check the guide ways of the three
axes (X, Y & Z). Check whether there are iron
filings or other types of grains attached to the
guide ways. To extend the lifespan, remove the
dust or they may scratch the slide.
Correctly locking the work pieces
When placing work pieces onto the workbench,
make sure that they are well locked or they may
spin out and cause personnel injury.
Correctly locking the doors
Make sure the operation door and the two side
doors are well locked to prevent the cutter from
bursting apart or iron filings from flying out,
which is dangerous.
To Next Page
Loading...