EasyManua.ls Logo

Sharper Image 206064 - Page 3

Sharper Image 206064
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
CLEANING AND MAINTENANCE
SAFETY WARNINGS
Drain water when not in use or if water becomes cloudy.
Before draining water or cleaning the unit, turn the power off and unplug it from the AC outlet.
Always drain water from the drainage hose. Do not pour water over the control panel.
Clean the unit with a soft cloth and mild soap. Do not use strong abrasives, detergents
or cleaning agents.
Do not immerse the device in water or under a shower.
Make sure the unit is clean and dry before storing.
Store in a clean, dry and cool place.
CAUTION: This device can produce very hot water. Please set the heat on a low setting,
then gradually increase the temperature to a comfortable level.
Do not leave this device unattended.
Do not allow children to use or play with the device. Keep this device out of the reach
of children.
Do not attempt to stand in this device.
Turn off the power and unplug the device when not in use.
Do not use this device if you have open wounds or sores on your feet or legs.
If you begin to feel faint or overheated, discontinue use immediately.
Consult your doctor prior to use if you have heart disease, a pacemaker or if you are pregnant.
Do not use this device if the power cord appears damaged or frayed. Contact Sharper Image
Customer Service Immediately.
OPERATION
(
CONT’D
)
7. Use the Surf/Heat button to turn the bubbles and heat on or off.
8. Use the Auto-Roller button to turn the massage rollers on or off.
9. Use the Temp. + and Temp. – buttons to adjust the water to the desired temperature.
NOTE: This unit does not have a cooling element, so the water temperature will
decrease gradually.
10. Sit in a chair and place your feet in the tank. Do not attempt to stand in the unit.
NOTE: Always check temperature of the water before placing your feet into the device.
11. Press the Timer button to set the automatic shutoff timer. Select the desired
time (10-60 minutes).
12. When you are finished, unplug the device. Place the cover on the tank if you wish to
reuse the water.
13. To drain the tank, position the drainage hose over a suitable drain. Open the hose to
drain the water.