SHE SHE20AC2001F - Oscillation and Timer Functions; Modes and Cool Air Function

To Next Page

To Previous Page

Seite 22 von 134

OSCILLATION

 Use the SWING button to activate the oscillation of the appliance. The display lights

up on the control panel.

 To deactivate the function, press the SWING button again.

NOTE

This function allows the blown-out air to be distributed to the left and right. This enables

horizontal air distribution in the room.

TIMER

 Use the TIMER button to switch off the appliance in a time-controlled way.

 With each press on the timer button, the operating time is gradually extended by half

an hour each time, from 30 minutes to 8 hours.

 Pay attention to the four indicators on the appliance:

o 1x press  30 minutes  0.5H lights up

o 2x press  1 hour  1H lights up

o 3x press  1.5 hours  0.5H + 1H lights up

o Etc.

MODES

 Use the MODE button to select between the following modes:

 The respective display lights up on the control panel.

 Normal Mode



The fan is running in normal operation.

 Nature Mode



Simulates a breeze to create pleasant, natural airflow.

 Sleep Mode

 Simulates a gentle breeze to generate an airflow adapted

to sleep requirements.

COOL AIR

 Use the COOL button to start the function.

 Make sure that the water level indicator is above the MIN level.

 As soon as the button is pressed, the appliance starts moistening the water filter to

create cold and moist air, that is then blown out of the appliance.