Shell Recharge - Page 16

ERROR CODES
Error code Problem
Display Solution
notice
The product will automatically stop
charging.Wait untilthe product
Productover-temperature OVER-TEMP
coolsdown, then usetheproduct
04
AC input undervoltage
AC input over voltage
Outlet is not properly
grounded
Output over current
Ground Fault alarm
LOW Vin
OVER Vin
UN GND
again.
Theproductwill automaticallystop
charging.Wait untilthe voltage
returnsto optimal range,then use
the productagain.
The product will automatically stop
charging. Wait until the voltage
returnsto optimal range,then use
the product again.
appearson the display
Switchoff the product.Ensurethe
outletis properlygrounded.Contact
qualifiedelectricianif in doubt.
The product will automatically stop
charging.Switchthe productoff.
Unplugthe productfromthe vehicle
OVER-CURR
and then from the outlet. Connect
the productto the vehicleand the
outlet.Setthecorrectoutputcurrent.
GFCI Protection:The charger is
equippedwith a Ground FaultCircuit
GFCIERROR Interruption(GFCI)reactionsystemto
protectagainstelectricshock.If the
chargermoduledetectsan output
groundfault, pleaseask dealerand
manufacturerto checkyour EV.
16