Shelly devices settings
After your Shelly device is included in the application, you
can control it, change its settings and automate the way
it works.
To switch the Device on and off, use the respective ON/
OFF button.
To enter at the details menu of the respective Device,
simply click on it’s name.
From the details menu you may control the Device, as
well as edit its appearance and settings.
Edit device
Аllows you to change the Device’s name, room and picture.
Device settings
Allows you to change settings. For example, with Restrict
login you may enter a username and password to restrict
access to the embedded web interface in Shelly. You may
automate the Device operations from this menu as well.
Timer
Тo manage the power supply automatically, you may use:
• Auto OFF - After turning on, the power supply will auto-
matically shutdown after a predened time (in seconds).
A value of 0 will cancel the automatic shutdown.
• Auto On - After turning off, the power supply will be
automatically turned on after a predened time (in sec-
onds). A value of 0 will cancel the automatic power-on.
Weekly schedule
This function requires an Internet connection. To use In-
ternet, a Shelly Device has to be connected to a local WiFi
network with working internet connection.
Shelly may turn on/off automatically at a predened time
and day throughout the week. You may add unlimited
number of weekly schedules.
Sunrise/Sunset
This function requires an Internet connection. To use In-
ternet, a Shelly Device has to be connected to a local WiFi
network with а working Internet connection.
Shelly receives actual information through the Internet
about the time of sunrise and sunset in your area. Shelly
may turn on or off automatically at sunrise/sunset, or at a
specied time before or after sunrise/sunset.
Settings
All the settings are well explained in THE EMBEDDED
WEB INTERFACE section of this user guide.
Firmware update
Shows present rmware version. If a newer version is
available, you can update your Shelly Device by clicking
Update.
Factory reset
Remove Shelly from your account and return it to its fac-
tory settings.
Device information
Here you can see the unique ID of Shelly and the IP it got
from the Wi-Fi network.
THE EMBEDDED WEB INTERFACE
Еven without the mobile app, Shelly can be set and con-
trolled through a browser and WiFi connection of a mo-
bile phone, tablet or PC.
Abbreviations used
• Shelly-ID – the unique name of the Device. It consists
of 6 or more characters. It may include numbers and let-
ters, for example 35FA58.
• SSID – the name of the WiFi network, created by the
Device, for example shelly1L-35FA58.
• Access Point (AP) – the mode in which the Device cre-
ates its own WiFi connection point with the respective
name (SSID).
• Client Mode (CM) – the mode in which the Device is
connected to another WiFi network.
Initial inclusion
Step 1
Install Shelly to the power grid following the schemes de-
scribed above and place it into the console. After turning
the power on Shelly will create its own WiFi network (AP).
WARNING! In case the Device has not created its own
WiFi network with SSID like shelly1L-35FA58 check if
you have connected Shelly correctly by the schemes
described above. If you do not see an active WiFi net-
work with SSID like shelly1L-35FA58, reset the Device.
If the Device has been powered on, you have to restart
by powering it off and on again. After turning the power
on, you have one minute to press 5 consecutive times
the button/switch connected to either input (SW1/SW2).
You have to hear the Relay trigger itself. After the trig-
ger sound, Shelly should return to AP Mode. If you have
physicall access to the device, you can press and hold
the Reset button for 10 second, which is placed on the
back of the device. Shelly should return to AP Mode. If
not, please repeat or contact our customer support at:
support@shelly.cloud
Step 2
When Shelly has created an own WiFi network (own AP),
with name (SSID) such as shelly1L-35FA58. Connect to it
with your phone, tablet or PC.
Step 3
Type 192.168.33.1 into the address eld of your browser
to load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface.
If it has been set up is correctly, you will see information
about:
• Settings menu button
• Current state (on/off)
• Present time
Settings – General Settings
In this menu, you can congure the Shelly device’s work
and connection modes.
WiFi Settings
The WiFi connection settings:
• Access Point (AP) Mode - allows the Device to operate
as a WiFi access point. The User can change the name
(SSID) and the password to access the AP. After you have
entered the desired settings, press Connect.
• WiFi Client Mode (CM) - allows the Device to connect
to an available WiFi network. In order to switch to this
mode, the User must enter the name (SSID) and the pass-
word to connect to a local WiFi network. After entering
the correct details, press Connect.
ATTENTION! If you have entered incorrect information
(wrong settings, usernames, passwords etc.), you will
not be able to connect to Shelly and you have to reset the
Device as explained in Step 1.
Login
Access to the Device
Leave unprotected
removing the notication for disabled authorization.
Enable authentication
You can turn authentication on or off
Password and username
This is where you can change your username and pass-
word. You must enter a new username and the new pass-
word, then press Save to save the changes.
Connect to cloud
you can turn the connection between Shelly and Shelly
Cloud on or off.
Factory reset
Return Shelly to its factory settings.
Firmware update
Shows present rmware version. If a newer version is
available, you can update your Shelly Device by clicking
Update.
Device reboot
Reboots the device.
Relay mode
Relay Screen
In this screen you can control, monitor and change the
settings for turning the power on and off. You can also
see the current status of the connected appliance to
Shelly, Buttons Settings, On and OFF.
To control your Shelly:
1. Press Relay
• To turn on the connected circuit press “Turn ON”.
• To turn off the connected circuit press “Turn OFF”
2. Press the > icon to go to the previous menu.
Shelly Management Settings
Each Shelly can be congured individually. This lets you
personalize each Device in a unique manner, or consis-
tently, as you choose.
Power On Default State
This sets the relays’ default state when powered from
the power grid.
• ON - By default when the Device is powered and the
connected circuit/appliance to it will be powered as well.
• OFF - By default the Device and any connected circuit/
appliance will not be powered, even when it is connected
to the grid.
• Restore last state - By default the Device and the
connected circuit/appliance will be returned to the last
state they occupied (on or off) before the last power off/
shutdown.
Auto ON/OFF
Automatic powering/shutdown of the socket and the
connected appliance:
• Auto OFF after: After turning on, the power supply will
be automatically shut down after a predened time (in
seconds). A value of 0 will cancel the automatic shut-
down.
• Auto ON after: After turning off, the power supply will
be automatically turned on after a predened time (in
seconds). A value of 0 will cancel the automatic start.
Manual Switch Type
• One button mode - relay is controlled with button 1 -
(momentary)
• Dual button mode - relay is controlled with button 1 for
On and 2 for Off (momentary)
• Toggle switch one button - relay is controlled with
switch 1
• Toggle Dual switch mode - relay is controlled with but-
ton 1 for On and 2 for Off
• Edge switch - relay is controlled with switch 1
• Edge Dual switch mode - relay is controlled with button
1 for On and 2 for Off
• Activation Switch - use it for motion sensor connected
to swith 1. Any input turns “ON” and resets Auto OFF timer.
• Detached Switch 1- switch doesn’t control dimmer
output.
Actions supported from Shelly1L
When the button is switched ON or OFF and When
the output is ON or OFF. The difference is that button
means physical action (push with hand), the relay can
be switched ON/OFF from scene, Schedule, Application
Different type of devices can support different actions.
You must activate the required option and enter the URL
that is being executed. Detailed description about what
commands are possible between Shelly device can be
found here https://shelly-api-docs.shelly.cloud/
Sunrise/Sunset hours
This function requires an Internet connection. To use In-
ternet, a Shelly Device has to be connected to a local WiFi
network with а working Internet connection.
Shelly receives actual information through the Internet
about the time of sunrise and sunset in your area. Shelly
may turn on or off automatically at sunrise/sunset, or at a
specied time before or after sunrise/sunset.
On/Off schedule
This function requires an Internet connection. To use In-
ternet, a Shelly Device has to be connected to a local WiFi
network with working internet connection. Shelly may
turn on/off automatically at a predened time.
Shelly may turn on/off automatically at a predened
time.
Hereby, Allterco Robotics EOOD declares that the radio
equipment type Shelly 1L is in compliance with Directive
2014/53/EU, 2014/35/EU, 2004/108/WE, 2011/65/UE.
The full text of the EU declaration of conformity is avail-
able at the following internet address:
https://shelly.cloud/declaration-of-conformity/
Manufacturer: Allterco Robotics EOOD
Address: Soa, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Web: http://www.shelly.cloud
Updates in the contact data are published by the Manu-
facturer at the ocial website of the Device
http://www.shelly.cloud
The User is obliged to stay informed for any amendments
of these warranty terms before exercising his/her rights
against the Manufacturer.
All rights to trademarks She® and Shelly® , and other
intellectual rights associated with this Device belong to
Allterco Robotics EOOD.
To Next Page
Loading...