Shelly VINTAGE User Guide
SHELLY VINTAGE А60/А19 ST64/ST21 G125/G40
This document contains important technical and safety infor- mation about the device and its safety use and installation. Before beginning the
installation, please read this guide and any other documents accompanying the device carefully and completely. Failure to follow the
installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial
guarantee (if any). Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or improper operation of this de-
vice due to failure of following the user and safety instructions in this guide.
The Shelly WiFi Dimming Bulb model A60/A19, ST64/ST21, G125/G40 by Allterco Robotics is intended to be installed into a standard light
socket E27/E26 in order to dim the light. Shelly may work as a standalone device or as an accessory to a home automation controller.
Specification
A60/A19 ST64/ST21 G125/G40
Power supply AC 220-240V/AC 110-130
Socket E27/E26
Power Rating 7 W 4 W
Brightness 750 lm 260 lm
Color Temperature 2700K
Color Index Ra>80
To Next Page
Loading...