◆ After Charging
1. Please unplug the main power supply first by removing the plug from the power socket, then remove the DC port from the battery.
You can then check the battery status on the display screen.
2. Insert the battery with caution, making sure that the slots at the bottom of the battery align with the pins on the bike frame, and slide
in carefully to avoid damaging the interior circuitry.
3. Lock the battery when finished to prevent theft.
NOTICE: If your battery displays abnormal charging behavior, such as:
• Longer-than-expected charge time
• Strange smell, smoke, or liquid emanating from battery and/or charger
• Overheating battery and/or charger
Please stop charging and contact www.shengmilo-bikes.com immediately..
◆ Charging Tips
• The battery can be recharged on or off the bike.
• A new battery may take longer to be fully charged when depleted.
• The charger will automatically stop charging once the battery pack is fully charged.
• You can recharge the battery after short rides as it does not have a memory effect.
To Next Page
Loading...
