◆ LCD Meter Key Guide
Key operations include short press, long press, and long press key combinations. Details are as follows:
1. Long press the key to power on/off the E-bike
(*If the electric bike is not used for more than 10 minutes, the LCD meter will automatically shutdown)
2. After power on, the LCD meter displays real-time speed (km/h)
and total mileage (DOD) by default. Short press the key to display the information to switch between total mileage (DOD), single
mileage (TRIP), maximum speed(MAX), and average speed(AVG).
3. Short press the key or the key to switch the power
level (PAS). The proportional output is shown in the following table:
4. Press the button to turn on the headlights, Pressing off again, the LCD instrument backlight dims when the headlights are turned on,
and returns to brightness when the headlights are turned off.
5. Press and hold the button, and the electric bicycle enters the electric assist push mode.
Electric bikes will travel at an average speed of 6 kilometers per hour. At the same time, the screen displays .
Press and hold the key again or press the brake to cancel this mode.
To Next Page
Loading...
