◆ Parameter Setting
1. Personalized Parameter Setting Steps:
Note: In the power-on state, the operation is performed when the display speed of the instrument is 0.
Press and hold the button for more than 2 seconds at the same time to enter the personalized parameter setting item selection
interface;
Short press the key to switch the selection interface of the personalized parameter setting item, short press the key to enter the
state of changing parameters;
Short press key to select parameters, long press for continuous addition Operation, long press for continuous
reduction operation;
Short press the key to save the parameter settings and return to the personalized parameter setting item selection interface;
Press and hold the key to save the parameter settings and exit the personalized parameter setting option interface.
2. Parameter settings:
02P sets options for metric and imperial units, 00 for metric, and 01 for imperial.
Short press the key to enter the state of changing parameters, short press the or key to select parameters, short press the key,
save the parameter setting, and return to the personalized parameter setting item selection interface;
To Next Page
Loading...
