To Next PageTo Next Page
Need help?Do you have a question about the Shenzhen Shenke Medical Instrument Technical Development SK-500II and is the answer not in the manual?
General| Brand | Shenzhen Shenke Medical Instrument Technical Development |
|---|---|
| Model | SK-500II |
| Category | Medical Equipment |
| Language | English |
Details warranty period, liabilities, exclusions, and procedures.
Describes the SK-500II syringe pump's features and application.
Outlines the intended use of the syringe pump in hospitals.
Lists essential safety measures for operating the machine.
Lists the key functions and capabilities of the syringe pump.
Details specifications like flow rate, bolus rate, and modes.
Describes the main components of the SK-500II syringe pump.
Interprets various symbols found on the product label.
Details the function of each system component (microcomputer, pump, etc.).
Lists the items included in the standard packaging case.
Identifies and explains the function of each button and indicator on the control panel.
Explains how the battery charges and indicates its status.
Instructions for connecting the syringe pump to the power supply.
Step-by-step guide for correctly installing the syringe.
How to access and set various menu parameters for the pump.
Details how to select and configure different operating modes.
Procedures for verifying the basic occlusion value.
Adjusting parameters when the pump is in the stop state.
How to view injection volume and timing during operation.
Accessing sensor and battery status readings.
Explains functions like Run, Bolus, Stop, Clear, Power, Night Vision.
Initial steps for connecting power and installing the syringe.
Configuring injection mode and setting the flow rate.
Steps for clearing data, starting injection, and general operation.
How to use the bolus function for faster injection.
Notifies users about near completion and final completion of injection.
Instructions for safely powering down the syringe pump.
Explains the bolus rate dependency on syringe size.
How to enable or disable the near completion alarm.
Steps to prepare new syringes and measure their length.
Guidance on correctly installing the syringe and compressing the strut.
How to unlock and set parameters based on syringe length.
Details for setting parameters for different syringe sizes.
Procedure to clear current injector parameters.
How to adjust the basic occlusion value to change alarm sensitivity.
Guidelines for cleaning and maintaining the syringe pump.
Recommended conditions for transporting and storing the device.
Periodic inspection of injection rate and battery.
Further details on battery inspection and testing.
Information on product service life and disposal.
Notes on interference prevention and user precautions.
Identifies common alarms and provides solutions for each.
Addresses frequent issues and their resolutions.
Information on contacting for service or repairs.
