Page 8
Top Exhaust (front entry)
• Ensure that the lter (not the foam block) is installed behind the front grill
• Ensure that the cover plate covers the vents in the bottom plate
• Ensure that both rear plugs are rmly inserted
• Ensure that the fan assembly is in the upper position (against the top plate of the C-12)
Top Exhaust (bottom entry)
• Ensure that the foam block (not the lter) is installed behind the front grill
• Ensure that the cover plate is completely removed
• Ensure that both rear plugs are rmly inserted
• Ensure that the fan assembly is in the upper position (against the top plate of the C-12)
To Next Page