To Next Page

To Previous Page

iii

11.

Components List ........................................................................................................................................................... 55

11.1. ATX/ATY Series Exploded View ..................................................................................................................... 55

11.2. ATX/ATY Series Maintenance Parts .............................................................................................................. 60

11.3. ATX/ATY Series Dedicated Jigs ..................................................................................................................... 62

Table of Contents2
Operations for Adjustment5
Entering the Service Mode5
Contents of Service Menu6
Service Mode Functions7
Disassembling and Assembling the Balance9
Precautions9
Inspecting the Balance Interior (Removing the Case and Pan Supporter)10
Replacing Components12
Replacing the Front Glass ASSY (C8)12
Replacing the Side Glass ASSY (C6, C7)13
Replacing the Roof Glass ASSY (C5)13
Replacing the Display Board ASSY (B2)13
Replacing the Power Board ASSY (B4)14
Replacing the Analog Board ASSY (B3)14
Replacing the Weight Loader ASSY (27)15
Replacing the Unit ASSY (1)16
Replacing the Detector ASSY (U11)17
Replacing the Force Coil ASSY (L1)17
Replacing the Stopper Plate (U14)20
Replacing the Stopper Lever (U15)20
Checking the Electronic Board21
Display Board ASSY (B2)21
Analog Board ASSY (B3)21
Preamp Board ASSY (B1)22
Power Board ASSY (B4)22
Hardware Adjustment23
Adjusting the Detector ASSY (U11) Height23
Adjusting the Tilt Error24
Adjusting the Balance25
Adjusting the Cornerload Error25
Software Adjustment27
EEPROM Initialization27
Model Selection27
Releasing and Setting the Setting Information Lock29
Releasing the Setting Information Lock29
Setting the Setting Information Lock29
Inputting Weight Values for Linearity Adjustment29
Linearity Adjustment30
Internal Weight Calibration (PCAL) (ATX Only)31
Operation Procedure and Process31
Sensitivity Calibration32
External Weight Calibration ECAL32
Sensitivity Calibration Using Internal Weight (ATX Only)33
Weight Loader Mechanism Operation Check35
Operation Procedure and Process35
Errors35
Eeprom36
PRINT Operations36
Data Edit (EDIT) Operations37
Backup (BKUP) Operations37
Download (RESTR) Operations37
All Initialization (INIT) Operations38
EEPROM Data Editing Software38
Updating the Program40
Programming Tools40
Programming40
Downloading the Program to the Tool40
Preparing the Tool44
Programming45
Performance Inspection47
Reproducibility47
Cornerload Error47
Linearity47
Tilt Error47
Problems and Solutions49
General Problem Solutions49
Error Display50
User Mode Errors50
Service Mode Errors51
Troubleshooting52
Display Won't Appear52
Key Operation Does Not Work53
ERR C" Is Displayed54
ERR H" Is Displayed56
When Power Is Switched On, Display Stops at or "Software Version57
Trouble of Weight Loader58
Components List59
ATX/ATY Series Exploded View59
ATX/ATY Series Maintenance Parts64
ATX/ATY Series Dedicated Jigs66

Brand	Shimadzu
Model	ATX Series
Category	Scales
Language	English

Shimadzu ATX Series Service Manual

Table of Contents

Other manuals for Shimadzu ATX Series

Questions and Answers:

Shimadzu ATX Series Specifications

Related product manuals