8 Setting the Analytical Parameters and File Management
8.4
8.
93
GC-2010 Plus
8.4Changing Items Displayed with [Customiz]
8.4.1 Screen description
Select [Customiz] (PF menu) from the [SET] key main screen to display the Display Custom-
ization screen shown in Fig. 8.4.1.
On this screen, set the items which will be displayed on the [SET] key main screen. Set an
item to “On” to display it on the main screen. Set the item to “Off” to wide its display.
Even if the sampling time display is “On” the sampling time is only displayed in SPLITLESS
mode.
Move the cursor using the [ △ ] and [ ▽ ] keys to select an item to be changed; select “On”
or “Off” using the [ ] and [ ] keys, then press the [ENTER] key to validate the selection.
The default it setting displays the column inlet pressures, column flow rate, split ratio,
sampling time and the split mode.
Fig. 8.4.1 Customizing the [Set] key main screen
△
△
To Next Page
Loading...
