Shimadzu GCMS-QP2010 - Environment Settings, Start-up


11
Day 1
3. Environment Settings, Start-up
Turn on the instrument power supplies in the following sequence:
c pretreatment unit
d GC
e MS
f printer and monitor
g PC
When the power is turned on for the first time after connecting the MS and PC, the MS driver
is installed automatically. Install the driver in accordance with section 8.8.3 Installing the
MS driver of the System User Guide.
Outline Procedure (See the System User Guide for more details.)
Press [Next (N)].
Display the list of the known drivers of the device.
Select “Another Device”.
Press [Next (N)].
Press [Use Disk
].
Insert the CD-ROM
Enter "E:¥Driver" and press [Enter].
Select “Shimadzu GCMS-QP2010”.
Press [Next (N)].
Press [Next (N)].
Environment settings
Set up the software environment, as described in section 3.3 System Configuration
of the
Operation Guide.
Start-up
Start evacuation, as described in section 4.1 Starting and Stopping the Vacuum System
of
the Operation Guide.
Hint