3.14 Switch for activating the emergency brake release function
Mobile DaRt Operation Manual
3-21
3.14 Switch for activating the emergency brake
release function
Switch for activating the emergency brake release function
This switch can be activated by using the same key as the power supply
panel key.
Turning the power supply panel’s key switch OFF, removing the key and
then turning this switch ON activates the emergency brake release function
and makes it possible to release the brake with the emergency brake
release switch mounted on the running handle.
The brake release lever on the running handle is disabled by activating the
emergency brake release function.
Fig. 3-16 Switch for activating the emergency brake release function
CAUTION
Do not turn on the switch to activate the emergency brake release
function except in case of an emergency.
Switch for activating
the emergency brake
release function
The emergency brake
release switch
To Next Page
Loading...
Need help?
General
