Shimano Steps EW-SW100 - Main Specifications; Battery; Battery Charger

10
Main specifications
 Battery
Battery main body Lithium-ion
Nominal capacity
BT-E6000 / BT-E6001 / BT-E6010 / BT-E8014: 11.6 Ah
BT-E6001 / BT-E8010 / BT-E8020 / BT-E8035 / BT-E8035-L: 14 Ah
BT-E8016 / BT-E8036: 17.5 Ah
Operating temperature
range
During discharge: -10˚C - 50˚C
During charging: 0˚C - 40˚C
Nominal voltage 36 V
• Depending on the drive unit, some batteries may be incompatible. For details, refer to the SHIMANO product website (https://
productinfo.shimano.com/).
• The drive unit may not operate correctly if the latest firmware version is not installed. Connect to E-TUBE PROJECT, then update the
firmware.
 Battery charger
Input
EC-E6000: 100 - 240 V AC, 2.5 A, 50/60 Hz
EC-E6002: 100 - 240 V AC, 1.5 A, 50/60 Hz
EC-E8004 (USA/CANADA): 120 V AC, 1.6 A, 60 Hz
EC-E8004 (Others): 100 - 240 V AC, 1.9 - 0.9 A, 50/60 Hz
Output
EC-E6000: 40 V DC, 4.4 A/42 V DC, 4 A
EC-E6002: 42 V DC, 1.8 A
EC-E8004 (USA/CANADA): 42 V DC, 4 A
EC-E8004 (Others): 42 V DC, 4 - 4.6 A (INPUT: 100 - 240 V AC)
Compatible batteries *
SHIMANO BT-E6000, BT-E6001, BT-E6010, BT-E8010, BT-E8014,
BT-E8016, BT-E8020, BT-E8035, BT-E8035-L, BT-E8036
* Includes batteries that may not be available in your region.