22
BT-E8035 / BT-E8035-L / BT-E8036
1.
Use the following procedure to insert from the lower side
of the battery.
(1) Insert from the lower side of the battery.
(2) Slide the battery. Push it in firmly until you hear it click
into place.
(2)
(1)
NOTICE
•
After pushing the battery in, pull the battery to confirm that it is locked securely.
Removing the battery
CAUTION
•
Firmly hold the battery during removal or transport, being careful not to drop it. Failure to do so may cause the components to fall
and break or cause injury.
Rear carrier mount type
BT-E6000 / BT-E6001
1.
Insert the key to release the lock.
(1) Press the power switch to turn the power OFF, and then insert the key into the key cylinder on the battery mount.
(2) Turn the key until you feel it make contact.
Key
Key cylinder
Power switch
2.
Remove the battery.
To Next Page
Loading...
