29
Turning the power ON from the battery
1.
Press the battery power switch.
The LED lamp turns on and the battery level is indicated.
BT-E6000 / BT-E6001
Power switch
BT-E8010 / BT-E8014 / BT-E8016
Power switch
BT-E6010
Power switch
BT-E8020
Power switch
BT-E8035 / BT-E8035-L / BT-E8036
•
The position of the power switch differs depending on the bicycle.
Power switch
Pressing the battery power switch for approximately six seconds will force the power OFF for emergencies. (excluding the BT-E6000 / BT-E6001 /
BT-E6010).
To Next Page
Loading...
