EasyManua.ls Logo

Shimano Steps SM-DUE10 - Specifications; Electric Wires; Supported Products

Shimano Steps SM-DUE10
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Installing electrical parts
Specifications
Specifications
Operating
temperature range:
Discharging
-10 - 50°C
Battery type
Lithium-ion battery
Operating
temperature range:
Charging
0 - 40°C
Nominal capacity
Refer to the “SHIMANO
STEPS Special Battery
and Parts User's
Manual.”
Storage temperature
-20 - 70°C
Rated voltage
36 V DC
Storage temperature
(battery)
-20 - 60°C
Drive unit type
Midship
Charging voltage
100 - 240 V AC
Motor type
Brushless DC
Charging time
Refer to the “SHIMANO
STEPS Special Battery
and Parts User's
Manual.”
Rated drive unit
power
250 W
TECH TIPS
The maximum speed provided by assist is set by the manufacturer, but may vary
depending on the conditions under which the bicycle is used.
The latest manual information can be accessed on our website (https://si.shimano.com).
Electric wires
There are two types of electric wire: the EW-SD300 and the EW-SD50. The supported electric
wire differs according to the model. Check the component specifications on the SHIMANO
product website in advance (https://productinfo.shimano.com/).
Supported products
The following products support each type of electric wire.
Product name Intended purpose EW-SD300 type EW-SD50 type
SHIMANO original
tool
Connecting / disconnecting
the electric wire
TL-EW300 TL-EW02
Dummy plug Blocking empty ports Y7HE30000 Y6VE15000

Related product manuals