Need help?Do you have a question about the Shimano CLARIS FC-R2030 and is the answer not in the manual?
General| Model | FC-R2030 |
|---|---|
| Series | CLARIS |
| Chainrings | 2 |
| Chain Line | 43.5 mm |
| Material | Aluminum |
| Crank Arm Length | 170mm, 175mm |
| Compatible BB Type | Threaded |
| Recommended BB | Shimano SM-BB-R60 |
| Threaded BB Shell Width | 68 mm |
| Compatible Chain | HG 8-speed |
| P.C.D. (mm) | 110 |
| Rear Speeds | 8 |
| Compatibility | 8-speed |
| Crank Construction | 2-PIECE CRANKSET |
| Chainring Combination | 50-34T |
| Chainring Sizes | 50/34T |
Grease and install bottom bracket cups and inner cover using SHIMANO tools.
Procedures for installing and removing press-fit bottom bracket cups and shell.
Steps to correctly install crank arms onto the bicycle axle, including tightening.
Procedure for replacing chainrings on cranksets, including torque specifications.
To Next Page