SI-7C26B
SG-7C26
SG-7C18
SG-7C16
CJ-NX10
Inter-7 Hub
with Coaster Brake
Cassette Joint
Technical Service Instructions
Be sure to read these service instructions in
conjunction with the service instructions for the
Inter-7 shifting lever before use.
CJ-NX10
JAPAN
CJ-NX10
JAPAN
CJ-NX10
JAPAN
Installation of the sprocket to the
hub
Place right hand dust cap C onto the driver on the right side
of the hub body. Next, install the sprocket and secure it in
place with the snap ring.
Cassette joint fixing ring
Cassette joint pulley
Align the yellow
marks to install.
Install the driver cap to the driver to the right side of the
hub body. Next, turn the cassette joint pulley in the
direction of the arrow so that the yellow mark is
aligned with the yellow mark, and then align the yellow
marks on the cassette joint with the yellow marks on
the right side of the hub body.
Pulley
Cassette
joint
Driver cap
Driver
Should be
aligned
Note the
direction
Note the
direction
Snap ring
Sprocket
Right hand
dust cap C
Yellow marks
Yellow marks
Secure the cassette joint to the hub with the cassette
joint fixing ring. When installing the cassette joint
fixing ring, align the yellow mark with the yellow
mark on the cassette joint pulley.
1)
Installation of the cassette joint to
the hub
Driver
2.
1.
CJ-NX10
JAPAN
Cassette joint fixing ring
After installing the cassette joint fixing ring, turn it 45
clockwise.
Turn 45
2)
Fit the cassette joint
bracket securely.
To Next Page