179(202)
Picture 4-1：Intermittent running setup 1
2) PV displays "0-ON" to stand for drying periods. "0-OFF" stands for machine
stop time. Press key to add or decrease time value of "SV/setup
value". Each press of can add or decrease 15 mins set time.
3) Press "ENTER" to confirm the input time value and enter into "0-OFF" time
setup items, then repeat step 2.
Picture 4-2：Intermittent running setup 2
Note：If set 0-ON as 04:00, 0-OFF as 05:00, which means drying periods is 4
hours stop time is 5 hours，then working for 4 hours and being stopped
for 5 hours and repeat this so long.
4) Cancel intermittent running by entering 00.00 at "0-ON" or "0-OFF" press
"ENTER" to confirm input value after time setup and enter into time setup
items from "1-ON" "week-ON".
To Next Page
Loading...
Need help?
General
