4(73)
4.1
Starting Up............................................................................................. 33
4.1.1
Turn on the Main Power Switch .................................................. 33
4.2
Interface Operation Flow ....................................................................... 33
4.3
About Keyboard Interface ...................................................................... 35
4.3.1
Input and Edit Alphabetic and Numerical Value .......................... 35
4.3.2
Alternative Options ...................................................................... 36
4.4
Log in/out ............................................................................................... 37
4.4.1
Administrator Log in .................................................................... 37
4.4.2
Administrator Log out .................................................................. 38
4.5
Interfaces Details ................................................................................... 38
4.5.1
System Initial Interface ................................................................ 38
4.5.2
Feeding/Weighing Selecting Interface ......................................... 40
4.5.3
Weighing Monitoring Interface (Taking four ingredients as
example, and models of other ingredients are as the same). Selecting
weighing system under feeding/weighing selecting interface and the
system will display the weighing monitoring interface which can also be
displayed by touching return key under other interfaces. ....................... 40
4.5.4
Weighing Data View Interface ..................................................... 42
4.5.5
Recipe Setting Interface .............................................................. 43
4.5.6
Recipe Elements ......................................................................... 44
4.5.7
Menu Interface ............................................................................ 46
4.5.8
Parameter Setting Interface ........................................................ 47
4.5.9
Calibration Interface .................................................................... 49
4.5.10
User Management Interface ........................................................ 50
4.5.11
Manual Mode Interface ............................................................... 51
4.5.12
Unit Parameter Setting Interface ................................................. 53
4.5.13
Alarm Message Interface ............................................................ 54
4.5.14
Control of Feeding ....................................................................... 55
4.6
Level sensor .......................................................................................... 56
4.6.1
Adjustment of Material Level Switch ........................................... 56
4.6.2
Functions of Each Level Switch .................................................. 57
4.7
Components Instructions ....................................................................... 59
4.7.1
Components category definition and distribution principle .......... 59
4.8
Calculation Method of Master-batch and additives ................................ 62
To Next Page
Loading...
Need help?
General
