7. UNIT INSTALLATION VM-5G
-16-
7-4 MOUNTING OF POWER SUPPLY UNIT
• Make sure to turn off the power.
• Failure to turn off the power before pulling the monitor unit out of the instrument rack
will result in serious damage and accidents.
1) Align the chassis of the power supply unit with the grooves in the top and bottom of the
instrument rack and push it into the rack. (It sound “kata” if inserted exactly.)
• Make sure not to touch the chassis.
2) Fasten the screws at the top and bottom of the power supply unit.
Mandatory
Caution
Prohibition
To Next Page
Loading...