Shop-Vac 92P series Manual

13 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

87534-87

12 13 14

15 16

18

17

A

A

A

A

A

A

B

a b 1

2

3

B

B

4

B

B

B

B

A

A

5 6 7

11a

8 9 10

19 20 21

22 23

24 25

26

27 28

11b

Other manuals for Shop-Vac 92P series

User Manual46 pages

Questions and Answers:

B
Brad TaylorAug 12, 2025
Why does my Shop-Vac 92P Vacuum Cleaner lose suction or run hot?
- W
  whitneydanielAug 12, 2025
  If your Shop-Vac Vacuum Cleaner experiences weakening suction or runs hot, several factors could be at play. First, a clogged filter could be the culprit; try brushing dirt from the filter, and replace it if the problem persists. An air leak could also be the cause; ensure all fittings (nozzles, hose, etc.) are tightly fitted and that the tank cover is properly sealed. Lastly, check for any obstructions in the hose or nozzle and remove them.
M
Mrs. Kara RossAug 16, 2025
What to do if my Shop-Vac 92P is misting in the exhaust air?
- A
  Andrew PerkinsAug 17, 2025
  If you notice misting in the exhaust air of your Shop-Vac Vacuum Cleaner, it's likely due to a saturated filter. Replace the saturated filter with a dry one to resolve this issue.
A
Andrew EvansAug 19, 2025
How to fix a Shop-Vac 92P when the mounting ring falling off?
- C
  Carla FloresAug 20, 2025
  If the mounting ring keeps falling off your Shop-Vac Vacuum Cleaner, the foam sleeve might be incorrectly positioned. Make sure to position the foam sleeve on the outside of the groove around the lid cage.
T
Toni ConleyAug 25, 2025
Why does my Shop-Vac 92P Vacuum Cleaner have no suction?
- J
  jonathanjohnstonAug 25, 2025
  If your Shop-Vac Vacuum Cleaner is experiencing a loss of suction, there are several potential causes: * A loose hose connection: Ensure you tighten the hose connection. * A clogged filter: Clean or replace the filter. * A full tank: Empty the tank. * A hole in the hose: Replace the hose.
R
randymartinAug 28, 2025
Why is my Shop-Vac Vacuum Cleaner blowing dust?
- E
  Ethan JohnsonAug 28, 2025
  If you notice dust discharging from the exhaust of your Shop-Vac Vacuum Cleaner, it could be due to several reasons: * The filter might not be installed correctly: Properly install the filter. * The filter may be damaged: Replace the filter. * The filter might be clogged, or the dust is too fine: Use a more efficient filter. * The filter might not be functional: Clean or replace the filter.
K
Kelly AllenAug 31, 2025
What to do if my Shop-Vac 92P will not start?
- K
  Kristine HarrisAug 31, 2025
  If your Shop-Vac Vacuum Cleaner won't start, it might be due to the following reasons: * There's no power at the receptacle: Check for power. * There may be a defective switch or motor: Contact Shop-Vac® customer service.
J
jacksonangelaSep 4, 2025
Why am I getting static shocks from my Shop-Vac 92P?
- J
  Jenna FloresSep 4, 2025
  If you're experiencing static shock while using your Shop-Vac Vacuum Cleaner, it could be due to: * A dry environment: Add moisture to the air if practical, using a console or installed humidifier. * Low relative humidity: This situation is temporary and does not affect the use of the vacuum cleaner.
D
daniel52Sep 7, 2025
How to find missing parts for my Shop-Vac 92P?
- V
  Vanessa HannaSep 8, 2025
  If you find parts or accessories missing from your Shop-Vac Vacuum Cleaner, check inside the tank, as they may be packed there.

Shop-Vac 92P series Specifications

General

Brand	Shop-Vac
Model	92P series
Category	Vacuum Cleaner
Language	English

Related product manuals

Preview: Shop-Vac 92P350

Shop-Vac 92P350

Preview: Shop-Vac 92L650C

Shop-Vac 92L650C

Shop-Vac 92L Series

Preview: Shop-Vac 92M Ultra Series

Shop-Vac 92M Ultra Series

Preview: Shop-Vac 90LN650C

Shop-Vac 90LN650C

Preview: Shop-Vac 90PN575A

Shop-Vac 90PN575A

Preview: Shop-Vac 90LN550A

Shop-Vac 90LN550A

Preview: Shop-Vac 90L Series

Shop-Vac 90L Series

Preview: Shop-Vac H87S550A

Shop-Vac H87S550A

Preview: Shop-Vac 16RT500A

Shop-Vac 16RT500A

Shop-Vac 87M Series