Shop-Vac K11-SQ14 - User Manual

To Next Page

User Manual

Please review before operating vac.

Wet/Dry Vacuum

MODEL K11-SQ14

K12-SQ14

K14-SQ14

Household and Workshop Use.

ATTENTION!

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Read all safety rules carefully before attempting to operate.

Retain for future reference.

DANGER!

Never operate this unit when flammable materials or vapors

are present because electrical devices produce arcs or

sparks that can cause a fire or explosion. NEVER OPERATE

UNATTENDED.

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

IMPORTANT SAFETY INSTRUCTIONS

Do not leave appliance when plugged in. Unplug from

outlet when not in use and before servicing.

Do not expose to rain - store indoors.

Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

Use only as described in this manual. Use only

Manufacturer's recommended attachments.

Do not use with damaged cord or plug. If appliance is not

working as it should, has been dropped, damaged, left

outdoors or dropped into water, contact Shop-Vac

Corporation for assistance.

Do Not: pull or carry by cord, use cord as a handle, close

a door on cord or pull cord around sharp edges or

corners. Do not run appliance over cord. Keep cord away

from heated surfaces.

Do not unplug by pulling on cord. To unplug, grasp the

plug; not the cord.

Do not handle plug or appliance with wet hands.

Do not put any object into openings. Do not use with any

openings blocked; keep free of dust, lint, hair and

anything that may reduce air flow.

10. Keep hair, loose clothing, fingers and all parts of body

away from openings and moving parts.

11. Do not pick up anything that is burning or smoking, such

as cigarettes, matches or hot ashes.

12. Do not use without dust bag and/or filters in place.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up flammable or combustible liquids

such as gasoline or use in areas where they may be

present.

16. Do not use your cleaner as a sprayer of flammable

liquids such as oil base paints, lacquers, household

cleaners, etc.

17. Do not vacuum toxic, carcinogenic, combustible or other

hazardous materials such as asbestos, arsenic, barium,

beryllium, lead, pesticides or other health endangering

materials. Specially designed units are available for

these purposes.

18. Do not pick up wood or coal ash; soot, cement, plaster

or drywall dust without full cloth filter or collection filter

bag in place. These are very fine particles that may pass

through the foam and disc filters and affect the

performance of the motor or be exhausted back into the

air.

19. Do not leave the cord lying on the floor once you have

finished the cleaning job. It can become a tripping

hazard.

20. Use special care when emptying heavily loaded tanks.

21. To avoid spontaneous combustion, empty tank after

each use.

22. The operation of a utility vac can result in foreign objects

being blown into eyes, which can result in eye damage.

Always wear safety goggles when operating vacuum.

23. STAY ALERT. Watch what you are doing and use

common sense. Do not use vacuum cleaner when you

are tired, distracted or under influence of drugs, alcohol

or medication causing diminished control.

24. The appliance is not intended for use by young children

or infirmed persons without supervision.

SHOP-VAC AUSTRALIA PTY LTD

Patents Issued and Pending.

Need help?

Do you have a question about the Shop-Vac K11-SQ14 and is the answer not in the manual?

This document describes the Shop-Vac Wet/Dry Vacuum, Models K11-SQ14, K12-SQ14, and K14-SQ14, designed for both household and workshop use.

Function Description:

The Shop-Vac Wet/Dry Vacuum is a versatile cleaning appliance capable of picking up both dry materials and liquids. It functions as a powerful vacuum cleaner for dust, debris, and spills, and can also be used as a blower. The unit is designed with double insulation, providing two systems of insulation instead of grounding, and is intended for use by adults.

Important Safety Instructions:

Before operating the vacuum, users must read and understand all safety instructions. Key warnings include:

Flammable Materials: Never operate the unit in the presence of flammable materials or vapors, as electrical devices can produce arcs or sparks leading to fire or explosion.
Unattended Operation: Never operate the vacuum unattended.
Indoor Storage: Do not expose the appliance to rain; store it indoors.
Children and Infirm Persons: The appliance is not intended for use by young children or infirm persons without supervision. Close attention is necessary when used by or near children. Young children should be supervised to ensure they do not play with the appliance.
Damaged Cord/Plug: Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, contact Shop-Vac Corporation for assistance. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
Cord Handling: Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces. To unplug, grasp the plug, not the cord. Do not handle the plug or appliance with wet hands.
Openings: Do not put any object into openings. Do not use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce airflow. Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
Burning/Smoking Materials: Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Filters: Do not use without a dust bag and/or filters in place.
Stairs: Use extra care when cleaning on stairs.
Flammable Liquids/Spraying: Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present. Do not use the cleaner as a sprayer of flammable liquids such as oil-based paints, lacquers, or household cleaners.
Hazardous Materials: Do not vacuum toxic, carcinogenic, combustible, or other hazardous materials such as asbestos, arsenic, barium, beryllium, lead, pesticides, or other health-endangering materials. Specially designed units are available for these purposes.
Fine Particles: Do not pick up wood or coal ash, soot, cement, plaster, or drywall dust without a full cloth filter or collection filter bag in place. These very fine particles may pass through foam and disc filters, affecting motor performance or being exhausted back into the air.
Tripping Hazard: Do not leave the cord lying on the floor after cleaning.
Heavy Tanks: Use special care when emptying heavily loaded tanks.
Spontaneous Combustion: To avoid spontaneous combustion, empty the tank after each use.
Eye Protection: Always wear safety goggles when operating the vacuum to prevent foreign objects from being blown into eyes, which can result in eye damage.
Alertness: Stay alert, watch what you are doing, and use common sense. Do not use the vacuum cleaner when tired, distracted, or under the influence of drugs, alcohol, or medication causing diminished control.
Damaged Motor Housing: If any motor housing parts become detached or broken, exposing the motor or other electrical components, discontinue operation immediately to avoid personal injury or further damage. Repairs should be made before reusing the vacuum.

Technical Specifications:

Models: K11-SQ14, K12-SQ14, K14-SQ14
Insulation: Double insulated (no grounding required)
Extension Cords: Use only a cord extension set compliant with AS3199. Conductor size must be 1.0mm² for lengths up to 25 meters and 1.5mm² for lengths from 25-32 meters.

Usage Features:

Unpacking and Set-up:
1. Remove the tank cover and any accessories.
2. Install appropriate filters for dry or wet pick-up (refer to specific sections).
3. Replace the tank cover.
4. Slip the cleaner end of the flexible hose into the intake port.
5. Attach extension wands to the accessory end of the hose, twisting slightly to tighten.
6. Attach a cleaning accessory to the extension wand, twisting slightly to tighten.
7. Plug the cord into the wall outlet. The cleaner is ready for use.
8. Power switch: I = ON, O = OFF.
Dry Pick Up Operation:
- Requires a foam sleeve and a reusable dry filter or disposable filter bag for proper filtration.
- Foam Sleeve and Dry Filter Disc (Not standard on all models):
  1. Disconnect the plug from the wall outlet.
  2. With the tank cover upside down, slide the foam sleeve over the lid cage until it completely covers the cage (Figure 1, 2).
  3. Center the reusable dry filter on the lid cage (Figure 3).
  4. Slide the mounting ring down over the filter until it's positioned against the ribs of the lid cage (Figure 4). The reusable dry filter must always be over the foam sleeve for dry pick-up.
  5. To remove for cleaning, remove the mounting ring and filter from the lid cage (Figure 5).
  6. Ensure the mounting ring is completely secure and the reusable dry disc filter completely covers the foam sleeve.
- Cartridge Filter (Not standard on all models):
  1. Slide the cartridge filter down over the lid cage.
  2. Place the filter retainer on top of the cartridge filter. Hold the base of the lid cage with one hand and turn the retainer clockwise to tighten.
  3. To remove, hold the base of the lid cage with one hand and turn the retainer counter-clockwise to loosen.
  4. Slide the cartridge filter off the lid cage.
- Disposable Filter Bag (Not standard on all models):
  - Required for vacuuming fine dust or powders (e.g., plaster, drywall dust, cold ashes, concrete dust).
  - 1. Grasp the cardboard collar firmly and slide the rubber guard onto the inlet fitting as far as possible.
  - 1. When secured, expand the bag and position it around the side of the tank.
Wet Pick Up Operation:
- Requires only the foam sleeve (not standard on all models) to be in position over the lid cage. Do not use the reusable dry filter for wet pick-up.
- Misting in exhaust air may occur if the foam sleeve becomes saturated. If this happens, remove and dry the foam sleeve or replace it with a dry one.
- Turn the unit off immediately upon completing a wet pick-up job or when the tank is full. Raise the hose to drain any excess liquid into the tank.
Blower Feature:
- The vacuum can be used as a powerful blower by inserting the hose end into the blower port on the rear of the unit.
- Clear the hose of any obstructions before attaching it to the blower port.
- Caution should be used due to the powerful force of air when using certain attachments.
Automatic Suction Shut-Off:
- The cleaner is equipped with an automatic shut-off for liquid pick-up. As the liquid level rises, an internal float seats itself against a seal at the motor intake, shutting off suction.
- When this occurs, the motor will develop a higher-than-normal pitch noise. Empty the liquid waste from the tank to continue use.
- If accidentally tipped over, the vacuum may lose suction. If this happens, place the vac in an upright position and turn the switch off to allow the float to return to its normal position, then resume operation.

Maintenance Features:

Filter Cleaning (Dry Pick Up):
- To clean the reusable dry filter, shake off excess dirt and dust or rinse with water. Allow the filter to dry completely and reinstall.
- Dirty filters reduce airflow and filtration efficiency. Do not machine wash or dry filters.
Foam Sleeve Cleaning (Wet Pick Up):
1. Disconnect the plug from the wall receptacle.
2. Place the tank cover upside down. Remove the foam sleeve by sliding it up and off the lid cage.
3. Shake excess dust off the foam sleeve with a rapid up and down movement.
4. Hold the foam sleeve under running water for one to two minutes, rinsing from the inside. A water wash is not always required, depending on the condition of the foam sleeve.
5. Gently wring out excess water, blot the foam sleeve with a clean towel, and allow it to dry.
6. Reinstall the foam sleeve on the lid cage.
- Wet pick-up accessories should be washed periodically, especially after picking up wet, sticky kitchen accidents, using a warm solution of soap and water.
Emptying Liquid Waste:
- Stop the motor and remove the plug from the wall receptacle.
- Remove the tank cover and deposit the liquid waste into a suitable drain.
- Some models have a convenient tank drain: remove the drain cap and empty the liquid contents into a suitable drain.
- After emptying, return the cover to its original position. Plug the cord into the wall receptacle and start the motor to continue use.
Lubrication:
- No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
Storage:
- Before storing, the tank should be emptied and cleaned.
- The power cord can be wound around the housing of the unit.
- Accessories may be stored in the built-in tool storage provided on the tank cover on the rear of the unit.
- The cleaner should be stored indoors.

Troubleshooting:

Suction weakens or cleaner runs hot:
- Possible Cause: Clogged filter. Remedy: Brush dirt from the filter. If the condition continues, change the filter.
- Possible Cause: Air leak. Remedy: Check all fittings for a tight fit (nozzles, hoses, etc.). Check that the tank cover is sealed properly.
- Possible Cause: Obstruction in hose or nozzle. Remedy: Check the nozzle, hose, etc., for obstructions, and remove if present.
Misting in the exhaust air:
- Possible Cause: Saturated filter. Remedy: Replace the saturated filter with a dry filter.