EasyManua.ls Logo

Shot Navi Evolve PRO Touch - Page 4

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
malfunction.
USB Port Maintenance: Do not allow moisture or dirt to accumulate on the USB
port or charging cable. This may result inmalfunction. Ensure the USB port is
facing downward and tap gently to remove any debris. Wipe with a dry, clean
cloth after use.
Avoid direct sunlight when storing.
Storing in places where the temperature exceeds 40°C will significantly reduce
performance.
If storing for a month or more, store with about 50% battery power remaining.
Note:
Batteries may become unusable if stored empty.
The battery protection circuit prevents overcharging and zero voltage, but if
stored for a long period of time, natural discharge may result in zero voltage. To
prevent this, store the battery with about 50% battery power remaining when
storing for a long period of time. Also, do not store the battery fully charged, as
this may cause battery failure. Do not store the battery for a long period of time
while it is connected to the charger. Overcharging may cause swelling, heat
generation, or fire due to chemical reactions.
Before Using the Pedometer
About the pedometer
The step count measured by this product may differ from the actual number of steps due to
individual physical conditions and usage environments. The sensitivity of the pedometer can
be adjusted from the activity settings in the main menu, so please adjust the sensitivity
according to your walking style. Use the step count as a general reference for daily activity.
Contents / Parts Names
Evolve PRO Touch Main Unit
Warranty Card and Quick Start Guide
USB Charging and Data Cable (Type-C)
1. Color Touchscreen LCD: Displays the navigation screen.
2. Top Button / Power On/Off Button: Moves the cursor up.
3. Middle Button / Confirm Button: Changes the clock face.
4. Bottom Button: Displays the menu. Allows you to go back to the previous screen and