Step 3: Connecting to Shot Scope
If you need to connect the handheld to the mobile app, turn
Bluetooth on in your phone settings, log into your app and then
press the ‘Connect’ button at the top of the screen. The handheld
screen will then change to show the connection has been made
successfully.
03
Step 2: Complete the tutorial on the app
The rst time you enter the Shot Scope app after registering,
you will be taken through a tutorial showing you how to use the
handheld and the app. During this process, you will turn on your
H4 and pair the device with the app. You will choose the settings
for your device and sync the handheld to ensure it has the latest
rmware installed. You must complete this process before using
the H4.
Set up tutorial
To Next Page
Loading...
