Shot-Scope PRO LX User Manual

Red/Black Optics
Customize the optical display in either Red or Black for clear and visible distances
in all light and weather conditions. To change between Red and Black, press the
R/B button on the top of the laser.
LCD Display and Modes
Modes
Press the “MODE” button to change measuring mode.
The PRO LX has two modes, both modes are available with Red and Black Optics:
Mode 2 (M2)
Continuous
Scan Mode
Red/Black Optics
Switch between a Red
and Black display
Mode 1 (M1)
Golf Mode
Target-Lock Vibration
+ Slope
Continuous Scan Mode - M2
Hold down the FIRE button whilst scanning. The data on the LCD
screen will continuously adjust as you move and change target. There is no
vibration or slope in this mode.
Golf Mode - M1
Turn on the rangender by pressing the FIRE button. There are two
ways you can use this mode:
1. Press and hold down the FIRE button while aiming the laser at a
target. The laser will vibrate when it has locked onto the target.
2. Press and release the FIRE button to get a quick distance to any
object on the golf course.
If slope is enabled, the slope adjusted distance will be shown at the bottom
of the display in M1

Shot-Scope PRO LX Specifications

General

Type	Laser Rangefinder
Magnification	6x
Range	900 yards
Accuracy	±1 yard
Display	LCD
Battery Type	CR2
Slope Technology	Yes