Shure PG52 - Page 9


3*8VDJHDQG6HWXS
3*6QDUH_7RP0LFURSKRQH
Usage
6QDUH
7RPV
3HUFXVVLRQ
Desired Response
0RVWDWWDFN
Crisp “snap.”

0HGLXPDWWDFN
Full, balanced sound.
0RVWDWWDFN
Natural sound.
Insert the threaded
end of the drum
mount knob into
the PG56.
Rotate the knob on
the drum mount
clockwise until it
is tight. Do not
overtighten with
tools.
Clamp the bottom of
the drum mount over
the outside edge of
the drum rim.
Pull up to lock into
desired postion.
Insert the XLR
connector into the
end of the PG56.
Setup
WRcm_WRin
above rim of top drum head. Aim mic at drum
head.
WRcm_WRin
one PG56 on each tom, or between each pair of
toms, above drum heads. Aim each mic at top
drum heads.
WRcm_WRin
above rim of top head of drum. Aim mic at drum
head.
3*'UXP0RXQW,QVWUXFWLRQV
1
2
4
3
(QJOLVK