8
10
9
11
R115S Replacement Cartridge Kit for
Super 55 and 55SH Series II Microphones
Strip off approximately ¼
in of insulation
Solder wire to the pad
Tuck excess wire
under bracket
Replace the front case
Tin with solder
Logo must be oriented as shown
Reinstall the four Phillips screws that
were removed
©2009 Shure Incorporated
27A12880 (Rev. 1)
Printed in U.S.A.
CARTRIDGE REPLACEMENT STEPS
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
Blue wire to blue pad – when
replacing cartridge in 55SH
Series II microphone
Note: No blue wire in Super 55
microphone
Black wire to black pad
Yellow wire to yellow pad
To Previous Page
Loading...