1/2
UA505 -- Remote Antenna Mounting Brack-
et Kit
General Description
The Shure UA505 Remote Antenna Mounting Bracket Kit lets you mount a 1/2-wave antenna away from the re-
ceiver or equipment rack. This kit includes one mounting bracket, a bulkhead adapter, and bulkhead adapter nut.
NOTE: Antennas and bracket mounting hardware (screws, washers and nuts) are not included in this kit.
Wall bracket dimensions: 4.662" L X 1.25" W X1.662" H
Antenna Placement
• Place antennas as high as possible and away from metal obstructions.
• Placing the antenna behind non-metallic curtains or stage flats is acceptable.
• Keep antennas separated by at least one wave length.
• Make sure the person using the transmitter can see the receiver antenna at all the times.
• Use RG-8U or equivalent 50 Ω low-loss cable such as a Shure UA825 or UA850.
• Do not use 1/4-wave antennas for remote mounting.
Wall Mount
To Next Page
