Remove the sole from the rest of
the shoe.
Separate sole polymer, toe plate and
heel plate/lead sole from the rubber
sole.
For 7 kg Diving shoes (item no
70850-7) use the sole polymer
(item no 70865), toe plate (item
no 70867) and heel plate (item
no 70866).
For 16 kg Diving shoes (item no
70850-16) use the lead sole
(item no 70851).
www.sitech.se
Assembly
Put the sole and plates/lead sole back on the shoe. Align the
holes of the sole over the screws on the shoe. Place straps lean-
ing forward. Straps are to be mounted on opposite sides of the
shoe.
7 kg Diving shoes 16 kg Diving shoes
Place the rubber sole over the inner
sole/lead sole.
70865
Sole
polymer
70851
Lead sole
70867
Toe plate
70866
Heel plate
Rubber
distance
To Previous Page
Loading...
