siat F144 - Page 13

A0398 13 F144/4-SX
3-SAFETY
3.6 OPERATORS’ SKILL LEVELS
The table below shows the minimum operator's skill for each operation with the machine.
OPERATION
Installation and set up of the
machine.
Adjustment of the box size.
Tape replacement.
Replacement of blades.
Replacement of drive belts.
Ordinary maintenance
(mechanical).
Ordinary maintenance
(electrical).
Extraordinary maintenance
(mechanical).
Extraordinary maintenance
(electrical).
STATE OF THE MACHINE
Running with safety protections
disabled.
Stopped by pressing the EMERGENCY
STOP button.
Stopped by pressing the EMERGENCY
STOP button.
Electric power disconnected.
Electric and pneumatic power
disconnected.
Electric and pneumatic power
disconnected.
Electric and pneumatic power
disconnected.
Running with safety protections
disabled.
Running with safety protections
disabled.
OPERATOR'S
SKILL
2 and 2a
1
1
2
2
2
2a
3
3
NUMBER OF
OPERATORS
2
1
1
1
1
1
1
1
1
3.5 NUMBER OF THE OPERATORS
The operations described hereinafter have been analized by the manufacturer; the number
of operators shown for each operation is suitable to perform it in the best way.
A smaller or larger number of operators could be unsafe.