8021823/126P/2018-12-17 • © SICK AG • Subject to change without notice 23
Setup and function
4.4 Display
Measured value display The measurement value is displayed by default:
EscSet
250000
RUN
Fig. 6: Measured value display
Menu display
EscSet
Menu
MEN
Fig. 7: Menu display
NOTE!
If the display is unable to show a distance value with the
6 digits available, only 5 digits are displayed and the 6th
digit (on the left) is replaced with! (an exclamation mark).
The characters scroll while the rmware versions are
being displayed.
To Next Page
Loading...
