8021823/126P/2018-12-17 • © SICK AG • Subject to change without notice 39
Electrical connection
7.3 Electrically connect distance measuring device
NOTE!
The distance measuring device has the connection
diagram and information on the inputs and outputs on
the type sign.
1. Ensure that there is no voltage applied.
2. Connect the measuring device according to the connection diagram.
• Connection 1 "Supply voltage"
• Connection 2 “Ethernet Port 1“
• Connection 3 “Ethernet Port 2“
12
34
Fig. 21: Position of the electrical connections
1 Plug for the supply voltage
2 Female connector for Ethernet Port 1
3 Female connector for Ethernet Port 2
4 not connected
To Next Page
Loading...
