SICK DL100 Pro - PROFINET IO High Feature - Measurement Values

Operation via Ethernet (Ethernet interface)
58 © SICK AG • Subject to change without notice • 8021823/126P/2018-12-17
Field "User information"
Parameter Description
User
information 1
Enter optional user information
Read/Write access
• Read and write
Factory setting
• Empty
User
information 2
→ See parameter "User input 1".
User
information 2
→ See parameter "User input 1".
Table 28: Page "Device information" – eld "User information"
Field "Store user information"
Parameter Description
Storage You may only enter user information at the user level "Mainte-
nance". This requires the password "esick".
Read/Write access
• Write only
Table 29: Page "User information" – eld "Store user information"
9.2.3 Measurement values
Field "Distance value"
Parameter Description
X-Scale Enter X-axis for graphic display of the distance value.
Read/Write access
• Read and write
Unit
• s
Y min / Y max Enter minimum and maximum value for the Y-axis.
Read/Write access
• Read and write
Unit
• m
Auto-Scale Y Click the button "Auto-Scale Y" to adjust the display to the
current measurement values.
Read/Write access
• Read and write
Unit
• m
Table 30: Page "Measured data" – eld "Distance value"