SICK DL100 Pro - PROFINET IO High Feature - Parameter Settings

Operation via Ethernet (Ethernet interface)
60 © SICK AG • Subject to change without notice • 8021823/126P/2018-12-17
Page “Measurement values”
(continued)
Field Description
Temperature Display of current internal device temperature
Read/Write access
• Read only
Unit
• °C
Operating hours Display of current operating hours
Read/Write access
• Read only
Unit
• h
Table 32: Page “Diagnosic data”
9.2.5 Parameter settings
NOTE!
Parameter changes only enter into permanent eect if
they are saved via the button "Storage".
Field "General settings"
Parameter Description
Distanceoset Specifyosetvalueforthedistancemeasurementvalue.
Read/Write access
• Read and write
Input value
• –600000…+300000mm
Unit
• mm
Factory setting
• 0
Preset Specify present value for the distance measurement value.
Read/Write access
• Read and write
Input value
• –300000 ... 300000
Unit
• mm
Factory setting
• 0
Table 33: Page "Parameter settings" – eld "General settings"