SICK DUSTHUNTER C200 - MCU Control Unit; Malfunctions; Warning and Error Messages in the SOPAS ET Program

107
8011952/YWL2/3-0/2016-08| SICK OPERATING INSTRUCTIONS | DUSTHUNTER C200
Subject to change without notice
TROUBLESHOOTING 6
6.3 MCU control unit
6.3.1 Malfunctions
6.3.2 Warning and error messages in the SOPAS ET program
Fig. 71: SOPAS ET menu: MCU/Diagnosis/Error messages/Warnings
● Display of error or warning: With LED symbol
● Description of error or warning: In the description field of SOPAS ET
Symptom Possible cause Action
No display on the LCD
● No supply voltage
● Connection line to LC-Display not
connected or damaged
● Defective fuse
▸ Check voltage supply.
▸ Check the connection line
▸ Exchange fuse.
▸ Contact SICK Customer Service.