SICK DUSTHUNTER C200 - Type Code

26
8011952/YWL2/3-0/2016-08| SICKOPERATING INSTRUCTIONS | DUSTHUNTER C200
Subject to change without notice
2 PRODUCT DESCRIPTION
2.2.4.3 Type code
The following type code defines the various configuration options in the same manner as
for the sender/receiver unit and reflector/scattered light receiver:
Type code MCU control unit: MCU-X X O D N X 1 0 0 0 N N N E
Integrated purge air supply
- N: Without (no)
- P: With (purged)
Voltage supply
- W: 90 ... 250 V AC
- 2: Optional 24 V DC
Enclosure variants
- O: Wall enclosure, SICK, orange
Display module
- D: With
Other options
- N: Without
Analog input option (plug-in module; 0/4...20 mA; 2 inputs per module)
- 0: Without
- n: With, n = 1
Analog output option (plug-in module; 0/4...20 mA; 2 outputs per module)
- n: With, n = 1
Digital input option (plug-in module; 4 inputs per module)
- 0: Without
Digital output power option (plug-in module; 48 V DC, 5 A; 2 changeovers per module)
- 0: Without
Digital output low power option (plug-in module; 48 V DC, 0.5 A;
4 make contact elements per module)
- 0: Without
Optional Interface module
- N: Without
- E: Ethernet type 1, COLA-B
- P: Profibus
- E: Ethernet type 2, COLA-B
Special versions
- N: No special features
EX certification
- N: Without EX certification
Software
- E: Emission measurement