SICK DUSTHUNTER C200 - Connection of Connection Line to MCU

49
8011952/YWL2/3-0/2016-08| SICK OPERATING INSTRUCTIONS | DUSTHUNTER C200
Subject to change without notice
ASSEMBLY AND INSTALLATION 3
3.3.4.3 Connection of connection line to MCU
Fig. 28: Plug connector connection to onsite line
Cable provided by customer according to
page 44, §3.3.2
Closed
Closed
Open
Open
A
A
A -A

+24 V
Note
To open, connect the plug connector to the plug
on the sender/receiver unit.


RS485 B

RS485 A


gnd

Shield