SICK DUSTHUNTER C200 - Setting the Response Time

75
8011952/YWL2/3-0/2016-08| SICK OPERATING INSTRUCTIONS | DUSTHUNTER C200
Subject to change without notice
START-UP AND PARAMETER SETTINGS 4
4.4.6 Setting the response time
Select the “Configuration / Value Damping” directory to set the damping time.
Fig. 49: SOPAS ET menu: MCU/Configuration/Value Damping
Field Parameter Remark
Damping time
for Sensor 1
Value in s Response time for the selected measured variable (see “Response
time”, page 13)
Setting range 1 ... 600 s