Mounting
56 © SICK AG · Germany · All rights reserved · Subject to change without notice 8013796/ZM63/2017-05-09
Operating Instructions
LMS5xx Laser Measurement Sensors
Chapter 5
5.2.7 Mounting with mounting kit 1
Using mounting kit 1 you can mount the LMS5xx on a mounting surface (wall, machine).
Fig. 28: Mounting with mounting kit 1 (part no. 2015623)
1. Mount mounting kit 1 on the mounting surface.
2. Mount the LMS5xx on mounting kit 1.
Important During mounting, please observe the dimensional drawings (see section 10.3.3
“Dimensional drawings, mounting kits” on page 109).
Threaded holes M8×9
Fixing screws
Mounting kit 1
To Next Page
Loading...
