✓
When logging in for the first time with the default password, the window Passwor‐
tänderung opens with the request to change the password.
✓
The user level has been successfully activated.
Deactivate user level:
1.
Open the SOPAS ET menu with
2. Under Devices , select the Manage user level menu item ...
✓
The User level management window opens.
3. In the dialog at Aktivierte Benutzerlevel , select the user level that you want to
deactivate (sliding switch: ON/OFF)
✓
The Password confirmation window opens.
4. You will be asked to enter the password for the service user level (administrator)
and confirm with OK .
✓
The user level has been successfully deactivated.
NOTE
The service user level (administrator) is always active and cannot be deactivated.
NOTE
To be able to manage the user levels, you must be logged into the service user level
(administrator).
8.2.3 Connection via SOPAS ET
Login is possible both in the project view in SOPAS ET and directly in the SDD.
To log in via the project view, use Login on the corresponding tile.
8 CONFIGURATION WITH SOPAS ET
106
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
