Ethernet service Function Note
SOPAS search Is required so that the device can be
found via the SOPAS ET search
The IP address can no longer be
changed.
The settings made only become active after the device is restarted. The Apply changes
button can be used to make immediate changes.
Figure 92: Service settings
8.2.5 System settings
8.2.5.1 System settings for the function levels EASY and EXPERT
Identification
The Identification area contains the following information:
•
Type code
•
Optional: Current type code
This field is only displayed when the current system constellation is different from
the original one delivered.
The MLG-2 consists of a receiver, fieldbus module and sender. These components
are defined by the type code in the receiver. If a different field bus module or/and
another sender is being used, the type code resulting from this is shown as the
current type code.
•
Part number (MLG-2 system)
•
Manufacturer
•
Serial number
•
Mounting location
You can enter a description of the MLG-2's application or usage here.
Version
The Version area contains the following information:
•
Hardware version
•
Software version
•
Fieldbus module hardware version
•
Fieldbus module software version
Pushbutton lock
You can use the pushbutton lock to set two options for the teach-in button on the
device:
•
Released: A teach-in process can be triggered using the button.
•
Locked: The teach-in button is locked to prevent inadvertent actuation, for exam‐
ple.
8 CONFIGURATION WITH SOPAS ET
108
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
