SICK MLG-2 ProNet - Preconfigurations; MLG-2 Product Properties; Setup and Function

3.5 °
10 °
3.5 °
10 °
Figure 2: Sender aperture angle
Receiving angle of receiver:
•
With optics ± 3.5 °
•
Without optics ± 3.5 ° (± 10 ° at a range of 2.5 m)
3.5 °
3.5 °
Figure 3: Sender aperture angle
3.2.3 Preconfigurations
Table 5: MLG-2 pre-configuration with fieldbus variant P
Position
16, 17
Output Address
01 System status
Status of digital output
NBB
LBB
FBB
ODI
IDI
126 SSA
02 Set via Profibus master SSA
3.3 MLG-2 product properties
•
Different beam separations from 2.5mm to 50mm
•
Monitoring heights from 130 to 3,140mm
•
Operating range up to 2m/3m/5m/8.5m and 14.5m
•
Quick response time
•
Convenient configuration using the SOPAS ET software interface
•
Detection of transparent objects
•
Dust- and sunlight-resistant
•
Integrated applications including object detection, height classification, etc.
3.4 Setup and function
The MLG-2 is an optical light grid. It comprises a sender and a receiver.
The sender consists of sender optics, several sender elements (LEDs), and actuation
electronics. The receiver consists of receiver optics, several receiver elements (photodi‐
odes) and evaluation electronics.
PRODUCT DESCRIPTION 3
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
13
Subject to change without notice