Figure 138: SOAPS ET - Activating cross beam switching
Configuring the Cross beam measuring function via SOPAS ET
NOTICE
If you activate the Cross beam measuring function, the real and virtual beams are
renumbered. Existing configurations are not converted. Check the existing configuration
for the Cross beam measuringfunction. Adjust the configuration accordingly.
CONFIGURATION WITH SOPAS ET 8
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
141
Subject to change without notice
To Next Page
Loading...
